Call back
+38 (044) 374-03-10
+38 (044) 374-05-10
ngm864@ukr.net
Связаться
Menu
Product
Services
About company
Contacts
Basket
Go to shopping cart
en
RU
UA
EN
НАПЛАВОЧНАЯ ПОРОШКОВАЯ ПРОВОЛОКА
Main
Catalog
SURFACING CORED WIRE
Type
Diameter,
mm
Hardness
Field of application
ПП-Нп18Х1Г1М EN14700 TZFe1
Diameter, mm:
3,6
Hardness:
HB 280-380
Scope of application:
Submerged surfacing of crane wheels, table rolls, brake drums, track rollers, track adjusting wheels, shaft seats etc.
ПП-Нп14ГСТ EN14700 TZFe1
Diameter, mm:
2,8; 3,0
Hardness:
НВ 220- 280
Scope of application:
Open-arc surfacing of shafts, beams, bungs, bearing seats etc.
ПП-Нп19ГСТ EN14700 TZFe1
Diameter, mm:
2,8; 3,0
Hardness:
НВ 260- 320
Scope of application:
Open-arc surfacing of shafts, beams, bungs, bearing seats etc.
ПП-Нп50Х3СТ EN14700 TZFe1
Diameter, mm:
3,0
Hardness:
HRC 46-52
Scope of application:
Open-arc surfacing of shafts, beams, bungs, bearing seats etc.
ПП-Нп30Х5Г2СМ TZFe3 EN14700
Diameter, mm:
2,6
Hardness:
HRC 50-57
Scope of application:
Open-arc surfacing of track assembly rollers, steel crankshafts, etc.
ПП-Нп30Х4Г2М EN14700 TZFe3
Diameter, mm:
2,0
Hardness:
HRC 44 - 50
Scope of application:
Open-arc surfacing of steel crankshafts, universal-joint crosses, etc.
ПП-Нп15Х4ГСМФ EN14700 TZFe3
Diameter, mm:
2,0
Hardness:
HRC 38-42
Scope of application:
Submerged surfacing of steel crankshafts, beams, etc.
ПП-Нп200Х15С1ГРТ EN14700 TZFe8
Diameter, mm:
3,2
Hardness:
HRC 48-59
Scope of application:
Excavator bucket teeth, lips and walls open-arc surfacing, etc.
ПП-Нп80Х20Р3Т EN14700 TZFe8
Diameter, mm:
3,2
Hardness:
HRC 59-63
Scope of application:
Excavator bucket teeth, drag lips open-arc surfacing, etc.
ПП-Нп150Х15Р3Т2 EN14700 TZFe8
Diameter, mm:
3,2
Hardness:
HRC 59-68
Scope of application:
Excavator bucket teeth, drag lips open-arc surfacing, etc.
ПП-Нп100Х10Н3Р3 EN14700 TZFe8
Diameter, mm:
3,2
Hardness:
HRC 50-58
Scope of application:
Excavator bucket teeth, drag lips open-arc surfacing, etc.
ПП-Нп350Х10Б8Т2 EN14700 TZFe6
Diameter, mm:
2,6; 3,2
Hardness:
HRC 52-63
Scope of application:
Track assembly (of tracklaying vehicles), ripper bucket teeth, bulldozer attached implements open-arc surfacing, etc.
ПП-Нп250Х10Б8С2Т EN14700 TZFe6
Diameter, mm:
3,2
Hardness:
HRC 52-59
Scope of application:
Track assembly (of tracklaying vehicles), ripper bucket teeth, bulldozer attached implements open-arc surfacing, etc.
ПП-Нп200Х12М EN14700 TZFe8
Diameter, mm:
3,6
Hardness:
HRC 42-50
Scope of application:
Submerged surfacing of parts operating under abrasive wear and buff load, table rolls, metal cold cutting knives, parts of mixing machines
ПП-Нп200Х12ВФ TZFe8 EN14700
Diameter, mm:
3,6
Hardness:
HRC 42-50
Scope of application:
Excavator bucket teeth, bulldozer and grader blades, sinter machine parts, exhauster baffles submerged surfacing
ПП-Нп90Г13Н4 EN14700 TZFe9
Diameter, mm:
2,8
Hardness:
НВ 160-240
Scope of application:
Crossings open-arc surfacing
ПП-Нп10Х14Т EN14700 TZFe6
Diameter, mm:
2,8
Hardness:
HRC 40-48
Scope of application:
Open-arc surfacing of plungers, sealing surface of pipe line fittings, etc.
ПП-Нп35В9Х3СФ EN14700 TZFe3
Diameter, mm:
3,6
Hardness:
HRC 43-55
Scope of application:
Submerged surfacing of steel rolls for hot reducing
ПП-Нп45В9Х3СФ EN14700 TZFe3
Diameter, mm:
3,6
Hardness:
HRC 43-55
Scope of application:
Submerged surfacing of steel rolls for hot reducing
ПП-Нп25Х5ФМС EN14700 TZFe2
Diameter, mm:
3,6
Hardness:
HRC 42-52
Scope of application:
Submerged surfacing of pipe-and-tube mill finisher rolls
ПП-Нп25Х5ФМСТ EN14700 TZFe2
Diameter, mm:
2,2; 2,8
Hardness:
HRC 44-52
Scope of application:
Submerged surfacing of pipe-and-tube mill finisher rolls<br>
ПП-Нп30Х4В2М2ФС EN14700 TZFe3
Diameter, mm:
3,6
Hardness:
HRC 48-53
Scope of application:
Open-arc and submerged surfacing of steel parts exposed to a hot gas, corrosion and erosion
ПП-Нп10Х17Н9С5ГТ EN14700 TZFe7
Diameter, mm:
2,8; 3,6
Hardness:
HRC 29-36
Scope of application:
Self-clinching, for submerged surfacing of chemical and generating apparatus, in particular sealing surfaces. Have a property of corrosive and cavitation resistance against hydroabrasive wear
ПП-Нп10Х15Н2Т EN14700 TZFe6
Diameter, mm:
2,6
Hardness:
НВ 240-260
Scope of application:
Reconstruction of hydroturbines, screws and other parts exposed to the cavitation wear
ПП-НП200ХГР EN14700 TZFe6
Diameter, mm:
1,8
Hardness:
HRC 42 - 50
Scope of application:
Cast-iron crankshafts open-arc surfacing
ПП-Нп12Х13 EN14700 TZFe6
Diameter, mm:
2,6 – 3,6
Hardness:
HRC 40 - 46
Scope of application:
Submerged surfacing of increased corrosion-proofed layers. Also used for surfacing of buffer layers before hardening surfacing
ПП-Нп12Х14Н3 (ПП-АН158) EN14700 TZFe6
Diameter, mm:
3,2; 3,6
Hardness:
HRC 40 - 46
Scope of application:
Open arc surfacing of powerful hydraulic presses plungers, etc.
ПП-Нп20Х13 EN14700 TZFe8
Diameter, mm:
2,6 – 3,6
Hardness:
HRC 40-48
Scope of application:
Submerged surfacing of increased corrosion-proofed layers. Also used for surfacing of buffer layers before hardening surfacing
ПП-Нп20Х17 EN14700 TZFe8
Diameter, mm:
2,6 – 3,6
Hardness:
HRC 35 - 46
Scope of application:
Submerged surfacing of increased corrosion-proofed layers. Also used for surfacing of buffer layers before hardening surfacing
ПП-Нп40Х13 EN 14700 TZFe8
Diameter, mm:
2,6 - 3,6
Hardness:
HRC 44 - 52
Scope of application:
Submerged surfacing of steel rolls for hot reducing, support rollers of tractors, plowshare plows, rippers.
ПП-Нп13Х25Т EN14700 TZFe9
Diameter, mm:
3,2; 3,6
Hardness:
HRC 25 - 30
Scope of application:
Submerged surfacing of increased corrosion-proofed layers. Also used for surfacing of buffer layers before hardening surfacing
ПП-Нп30Х20М EN14700 TZFe5
Diameter, mm:
2,0; 2,2
Hardness:
HRC 30 - 42
Scope of application:
Submerged surfacing of increased corrosion-proofed layers. Also used for surfacing of buffer layers before hardening surfacing
ПП-Нп30Х20МН EN14700 TZFe5
Diameter, mm:
2,0; 2,2
Hardness:
HRC 30 - 42
Scope of application:
Submerged surfacing of metallurgical equipment details.
ПП-Нп30ХГСА EN14700 TZFe1
Diameter, mm:
1,8 – 3,6
Hardness:
HRC 26-36
Scope of application:
Bung swivels, other parts dimension recovery
ПП-Нп30Г20Т EN 14700 TZFe9
Diameter, mm:
2,2 - 3,0
Hardness:
HВ 350-400 (after work hardness)
Scope of application:
Open arc surfacing of steel 110G13L to casting defects eliminate.
ПП-Нп25Х10Г10Т EN14700 TZFe9
Diameter, mm:
3,2; 3,6
Hardness:
НВ 220 - 350
Scope of application:
Crane wheels and brake drums submerged surfacing
ПП-Нп25ХГ2СТ EN14700 TZFe1
Diameter, mm:
1,6 - 2,8
Hardness:
HRC 26-35
Scope of application:
Open-arc surfacing of beams, bungs, mounting seats for frictionless bearings, etc.
ПП-НГМ1Ф-25 (ПП-Нп12ХГ2МТ) EN14700 TZFe1
Diameter, mm:
2,4 – 3,0
Hardness:
HRC 24-33
Scope of application:
Submerged surfacing of beams, bungs, mounting seats for frictionless bearings, etc.
ПП-НГМ1Ф-30 (ПП-Нп10Г2СФ) EN14700 TZFe1
Diameter, mm:
1,8 - 2,6
Hardness:
HRC 24 -33
Scope of application:
Mining equipment parts submerged surfacing followed by galvanic processing
ПП-НГМ2Ф-35 (ПП-Нп10Х1Г2СФ) EN14700 TZFe1
Diameter, mm:
2,4 – 3,0
Hardness:
HRC 24-32
Scope of application:
Submerged surfacing of beams, bungs, mounting seats for frictionless bearings, etc.
ПП-НГМ3Ф-50 (ПП-Нп25Х3Г2СФ) EN14700 TZFe1
Diameter, mm:
2,4 – 3,0
Hardness:
HRC 42-50
Scope of application:
Submerged surfacing of beams, bungs, mounting seats for frictionless bearings, etc.
ПП-НГМ11Ф-30 (ПП-Нп10Х17Н9Г2С5) EN14700 TZFe7
Diameter, mm:
2,8; 3,0
Hardness:
HRC 29-39
Scope of application:
Submerged surfacing of the sealing surface of insolation valve
ПП-НГМ12Ф-20 (ПП-Нп10Х20ГМН2) EN14700 TZFe7
Diameter, mm:
2,2 – 2,6
Hardness:
НВ 160 - 200
Scope of application:
Mining equipment parts submerged surfacing
ПП-НГМ12Ф-40 (ПП-Нп10Х12ГМН2) EN14700 TZFe7
Diameter, mm:
1,8 – 2,4
Hardness:
HRC 41-48
Scope of application:
Surfacing of plungers, sealing surface of pipe line fittings, etc.
ПП-НГМ12ФВ-40 (ПП-Нп15Х15ГМН2) EN14700 TZFe7
Diameter, mm:
2,2 – 2,6
Hardness:
HRC 25 - 32
Scope of application:
Mining equipment parts submerged surfacing without galvanic processing
ПП-НГМ12ФН2-40 (ПП-Нп15Х17ГМН2) EN14700 TZFe7
Diameter, mm:
2,2 – 2,6
Hardness:
HRC 18 - 26
Scope of application:
Mining equipment parts submerged surfacing without galvanic processing
ПП-НГМ12Ф-40М (ПП-Нп15Х17ГМН2Ф) EN14700 TZFe7
Diameter, mm:
2,2 – 2,6
Hardness:
HRC 18 - 26
Scope of application:
Mining equipment parts submerged surfacing without galvanic processing
ПП-НГМ13Ф-45 (ПП-Нп10Х13ГМН2БФ) EN14700 TZFe7
Diameter, mm:
2,4 – 3,0
Hardness:
HRC 40-47
Scope of application:
СС- machine rollers submerged surfacing
ПП-НГМ13Ф-45М (ПП-Нп15Х17ГМН2БФ) EN14700 TZFe7
Diameter, mm:
3,2; 3,6
Hardness:
HRC 30 - 45
Scope of application:
Submerged surfacing of rollers of curvilineal segments of CC- machine
ПП-НГМ14Ф-25 (ПП-Нп10Х22H5ГCМ2) EN14700 TZFe8
Diameter, mm:
3,0 - 3,6
Hardness:
HRC 20 - 23
Scope of application:
Surfacing of rollers for mineral cotton production
ПП-НГМ16Ф-25 (ПП-Нп30Х13Г5Н5М3) EN14700 TZFe7
Diameter, mm:
3,2; 3,6
Hardness:
HRC 18 - 24
Scope of application:
Submerged surfacing of metallurgical equipment details.
ПП-НГМ17Ф-30 (ПП-Нп15Х25ГСМ2Н5БФВ2) EN14700 TZFe7
Diameter, mm:
3,2; 3,6
Hardness:
HRC 18 - 28
Scope of application:
Submerged surfacing of large-size parts operating under hot temperature
ПП-НГМ21Ф-55 (ПП-Нп40Х7Г3М2Ф2В2)
Diameter, mm:
3,0 – 3,6
Hardness:
HRC 55 - 60
Scope of application:
Submerged surfacing of steel rolls for hot reducing.
ПП-НГМ2С-30 (ПП-Нп12ХГ2ТС) EN14700 TZFe1
Diameter, mm:
2,2 – 2,6
Hardness:
HRC 26 - 35
Scope of application:
Beams, bungs, mounting seats for frictionless bearings open-arc surfacing, etc.
ПП-НГМ14С-60 (ПП-Нп150Х10Р2ФТ) EN14700 TZFe6
Diameter, mm:
1,6 - 2,0
Hardness:
HRC 56 - 65
Scope of application:
Open-arc surfacing of small-envelope parts operating under intensive abrasive wear (plowshares, ripper teeth, etc.)
ПП-НГМ14С-60М (ПП-Нп150Х10Р2МТ) EN14700 TZFe6
Diameter, mm:
1,6 – 3,2
Hardness:
HRC 56 - 65
Scope of application:
Open-arc surfacing of parts operating under intensive abrasive and hydroabrasive wear
ПП-НГМСВ-1 (ПП-Нп20Х10Г12Н9) EN14700 TZFe10
Diameter, mm:
2,8 – 3,2
Hardness:
HB 180 - 220
Scope of application:
Open-arc surfacing of buckets of excavators, parts of grinding equipment, etc.
ПП-НГМ13С-45 (ПП-Нп12Х15ГМН2БФ) EN14700 TZFe7
Diameter, mm:
2,2 – 3,2
Hardness:
HRC 42 - 47
Scope of application:
СС- machine rollers open-arc surfacing
ПП-НГМ18С-55 (ПП-Нп150Х10Р2Б3М2Т) EN14700 TZFe6
Diameter, mm:
2,8 - 3,2
Hardness:
HRC 55 - 63
Scope of application:
Open-arc surfacing of wear parts of oilfield and mining equipment; surfacing of excavators buckets' teeth, visors of dredges, etc.
ПП-НГМ18С-55М (ПП-Нп200Х10Б3М2Р) EN14700 TZFe6
Diameter, mm:
1,6 – 2,6
Hardness:
HRC 55 - 63
Scope of application:
Open-arc surfacing of wear parts of oilfield and mining equipment; surfacing of excavators buckets' teeth, visors of dredges, etc.
1
2
>
>>
x
Feedback form
Your name (required):
For example: Alex
Enter Your name (required)
Phone (required)
For example: +38 099 999 99 99
Enter Phone (required)
Send
x
Feedback form
Your name (required):
For example: Alex
Enter Your name (required)
Phone (required)
For example: +38 099 999 99 99
Enter Phone (required)
Message
Send
x
Спасибо!
ваша заявка
принята, мы с вами
свяжемся
в ближайшее время
x
Feedback form
Your name (required):
For example: Alex
Enter Your name (required)
E-mail
Enter E-mail
Send
x
Feedback form
Your name (required):
For example: Alex
Enter Your name (required)
Phone (required)
For example: +38 099 999 99 99
Enter Phone (required)
Send
x
Feedback form
Your name (required):
For example: Alex
Enter Your name (required)
Phone (required)
For example: +38 099 999 99 99
Enter Phone (required)
Send