PP-ANPM

Flux – cored wires for welding

Flux – cored wires for welding of PP-ANPM-1, PP-ANPM-2, PP-ANPM-3 are used for automatic and semi-automatic welding of carbon and low-carbon steels of St3, St3Gps, 09G2, 09G2S, 10XSND, 10G2s1, St20, St30. The wires also are used for welding and surfacing by contact tube method with forced formation of weld metal.
The wire is produced according to GOST 2671-84 and TU U 23165028-006:2009.

TECHNICAL SPECIFICATION

Grade	Wire core type	Structure	Diameter, mm	Protective atmosphere	Welding current
ПП-АНПМ-1 PP-ANPM-1	Рутиловый Rutile	Трубчатая Tubular	1,6,2,0,2,4	С/З	=+
ПП-АНПМ-2 PP-ANPM-2	Рутиловый Rutile	Трубчатая Tubular	1,6,2,0,2,4	С/З	=+
ПП-АНПМ-3 PP-ANPM-3	Рутиловый Rutile	Трубчатая Tubular	1,6,2,0,2,4	С/З	=+

 

MECHANICAL PROPERTIES OF WELD METAL

Grade	σвр, Мпа	σт, Мпа	δ,%	Ан, Дж/см2(+200С)
ПП-АНПМ-1 PP-ANPM-1	500-650	≤450	20	80
ПП-АНПМ-2 PP-ANPM-2	550-700	≤490	20	100
ПП-АНПМ-3 PP-ANPM-3	600-750	≤540	18	80

 

WELDING CONDITIONS

Diameter, mm	Iсв,А	Uд,В	Position of seam
2,4 2,0 1,6	250 - 450 200 - 350 150 - 280	24 -32 22 - 30 20 - 28	Down Down Down

The wires are used mainly for welding of building structures.

 

<< Back